X-15 Stands
-
Stand system X-15 EXPO wire is a mobile Danish-made exhibition stand system (also called a structure or a farm), whose beam dimensions are 15x15 cm. Beams and soles connect to the cube, making installation simple and quick. An X-joint is used to connect the beams together. The poster is stretched with the help of straps. The system is mostly used for exhibition stands, photo walls, advertising signs, commercial areas, hanging lamps to illuminate the busy area of the stand, hanging advertisements, various indoor and outdoor events.
STAND POSTER MANUFACTURING LOWEST PRICES - compared to other stands, printing on a cast tarp is produced the cheapest! Stand posters can be with or without graphic printing (white color). Posters without printing are half the price, they are mostly used to separate stand partitions or internal rooms. Ask about the use of other desired materials. It is also a great way to hang or pin your own photos, posters or relevant information. It can be attached with double-sided adhesive tape, plasticine or pins.
- Structural beams from 15 cm to 240 cm.
-
Beam steps: every 15 cm
- The thick part of the beam: Ø 20 mm
- The thin part of the beam: Ø 8 mm
- Composition: 70% aluminum, 30% plastic.
- Weight (average): 1.3 Kg / m
- Colors: black, white, gray
-
Use: indoors, outdoors only when firmly established
-
Recommended total horizontal beam length: up to 4 m
- Recommended total stand height: up to 6 m
- Storage (volume): 44 meter beams / m3
- Poster hanging: fastening straps, elastics, metal bands + holders
- Installation tools: ladder
Load Table X-15. The load is calculated on a horizontal beam, which is connected by two cubes and placed on two vertical beams.
Beam length Weight in center Distributed weight 60 cm 100 Kg 100 Kg 120 cm 100 Kg 100 Kg 180 cm 100 Kg 100 Kg 240 cm 75 Kg 100 Kg 
Photos of structures X-15
Tightening nylon straps (thin 15-20 cm long are recommended) can be used to fasten the posters - they can be purchased additionally. To remove the poster, we recommend using pliers to cut the straps quickly and safely. Using a knife, you can cut into a poster or structures.
Prefab, mobile transport boxes (more info here...)
Examples of stands with prices and detailed information:
-
Stand system X-15 EXPO wire - thicker and more massive construction of aluminum and protective plastic layer than X-10. Characterized by light weight and increased strength. It is intended for mobile exhibitions and events indoors and outdoors, easy to install, does not require additional screws (everything is built into the structure itself). We make stands according to individual orders - ASK.
