Flagpoles

Fiberglass flagpoles with national, promotional or company flags

Flagpoles - these Swedish-made flagpoles are mechanically stable, made of one-piece fiberglass construction, resistant to wind speed up to 60 m/s, flexible and light (23-43 kg). The stems do not oxidize or rust, so they do not require any additional maintenance or painting, they are electrically impermeable, and they are easy to build. Perfect for hanging state, company or advertising flags. The manufacturer provides even a 10-year warranty!

The standard set includes:

Fiberglass mast STANDART
Top (optional) + tip
Rope + bracket
Carbines
Concreting anchors

When ordering a flagpole,
delivery throughout Lithuania (except Neringa)

!!! FOR FREE !!!

Flag pole with external flag raising mechanism. Stem bottom up to 15cm Ø, stem top 6.5cm Ø. Fiberglass thickness from 3 mm. Table of weight and maximum wind strength:

Height	Wind	Weight
6 m	iki 60 m/s	23 kg
7 m	iki 55 m/s	25 kg
8 m	iki 45 m/s	27 kg
9 m	iki 45 m/s	29 kg
10 m	iki 50 m/s	37 kg
12 m	iki 50 m/s	43 kg

For taller masts (up to 24 m) - ASK

You can choose the top of the mast:

A — Silver
B — Gold
C — White
D — White flattened

The flagpole can be equipped with three different flag raising mechanisms:

STANDART - Standard external lift
LOCK - Internal lift with lock
CRANK - Internal lifting with handle

STANDART is a standard flag raising mechanism where the rope is twisted and attached to an external holder. In strong winds, the rope may hit the mast body and make a slight noise. The rope remains outside.

LOCK - flag raising mechanism with a metal lock. Great protection against flag theft. The rope inside the mast is protected from the wind, lasts longer and does not make noise. Rope inside the mast.

CRANK - flag raising mechanism with an insertable handle. The rotating handle makes it easy and quick to raise or lower the flag. Protection against flag theft. The rope inside the mast is protected from the wind, lasts longer and does not make noise. Rope inside the mast.

Upon request, we can come, concrete and install the flagpole at the specified address:
Complete installation of the mast: 140 € + VAT / unit. (paving +30 € + VAT; asphalt +110 € + VAT)
Arrival at the facility: 0.5 € + VAT \ km (min. 20 € + VAT)

Installation work consists of two stages:
1. The foundation is excavated and concreted, left to harden for about 1-2 weeks,
2. The mast is screwed and raised.

Recommended flag size based on flagpole height. The recommended height of the flagpole is close to the height of the existing building, if the space is larger, the flagpole can be higher.